Photomicro Sensor, Light On, Cable Type, PNP Output, K-Type, 5-24 VDC
Unit of Measure

Specifications

Brands

N/A Autonics USA

Direct Current (DC) Voltage

N/A 5 to 24 V

Sensing Type

N/A Through Beam

Sensing Distance

N/A 5 mm

Sensing Target

N/A Opaque

Light Source

N/A Infrared Light Emitting Diode (LED)

Maximum Light ON Response Time

N/A 20 µs

Maximum Dark ON Response Time

N/A 100 µs

Tolerance (±)

N/A 10 %

Maximum P to P Ripple Factor

N/A 10 %

Maximum Current Consumption

N/A 15 mA

Operation Mode

N/A Dark On (Set by Control wire) Light On

Control Output

N/A Positive Negative Positive (PNP) Open Collector

Connection Type

N/A Diameter 2.5 mm, 4-wire, 1m

Maximum Environment Ambient Illumination (Fluorescent Lamp Received Illumination)

N/A 1000 lx

Environment Ambient Temperature

N/A -20 to 55 ºC

Environment Ambient Storage Temperature

N/A -25 to 85 ºC

Protection Structure

N/A Ingress Protection (IP) 50 (International Electrotechnical Commission (IEC) Standard)

Approval

N/A European Conformity (CE)

Environment Ambient Relative Humidity (RH)

N/A 35 to 85 %

Environment Storage Ambient Relative Humidity (RH)

N/A 35 to 85 %

Case Material

N/A Polybutylene Terephthalate (PBT)

Sensing Part Material

N/A Polycarbonates (PC)

Minimum Sensing Target

N/A ≥ 0.8 mm × 1.8 mm

Hysteresis (Distance)

N/A ≤ 0.05 mm

Response Frequency

N/A 2 kHz

Peak Emission Wavelength

N/A 940 nm

Indicator

N/A Operation Indicator (Red LED)

Direct Current (DC) Load Voltage

N/A ≤ 24 V

Maximum Load Current

N/A 50 mA

Residual Voltage

N/A NPN: ≤ 1.2VDC PNP: ≤ 1.2VDC ,

Protection Circuit

N/A Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit

Insulation Resistance

N/A ≥ 20 Mohm (250 VDC, megger)

Noise Immunity

N/A The square wave noise (pulse width: 1µs) by the noise simulator ±240VDC

Dielectric Strength

N/A 1,000VAC 50/60Hz for 1 minute

Vibration

N/A 1.5 mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours

Shock

N/A 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times

Connection

N/A Cable type

Core

N/A AWG28 (0.08 mm), 19-core, insulator out diameter: 0.65 mm

Approximate Weight

N/A 50 g